Gear_sm_25

Soma Pigniczki

Board 2026

ISO Power Block V10

Zuma

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

Francisco Adónis

The main pedalboard I use across bands and projects, with a consolidated yet versatile layout that makes sure to sound the best it can in every possible scenario I find myself in, with as little compromise as possible. No matter what the crazy jungle that is the underground Portuguese music scene throws at it, this board can handle anything from the scrappiest PA-less basement gig to a full scale show with no compromises.

For amp-less (and the sake of what's left of my back) and amped operation ("Wet/Dry/Wet esque" arrangement or simple amp only operation) with parallel synth signal and stereo capabilities.

In amp-less operation, the amp loop is patched on the MOD2 with a patch cable, with the ToneX pedal handling amp sim duties.

In amped operation, the MOD2 A/B jacks are patched with the C jack going to the amp input, or in 4-cable method the A jack goes into the amp input, fx loop send to B, and C to fx loop return. 

The MOD2 I/O are as follows:
A/B - Amp insert send and return
C - Unbalanced out
D - Pitch Shifter AUX out
MIDI I/O - Self explanatory

MIDI Chain:
MOD2 MIDI Input > ES5 > Plethora x3 > ToneX  > MOD2 MIDI Output

Guitar goes into the Polytune input, into the noise gate. The gate controls noise on the "pre amp" section of my pedalboard, meaning the ES5 and it's effects. The noise gate's send jack goes to ES5 input.

The ES5 Loops are as follows:
Loop 1: Vox v845 Wah
Loop 2: EHX Pitchfork +
Loop 3: EHX Op Amp Big muff
Loop 4: Danelectro Eisenhower Fuzz
Loop 5: EHX Good Vibes

ES5 Output goes to the noise gate's return, and it's output in turn goes to the inner MOD2 A jack, where A/B outer jacks serve as the amp insert loop. Inner B jack goes to the ToneX, which in turn goes to Plethora x3 as a stereo chain for "post amp" effects. From the Plethora, the stereo output pair goes into MOD2 C/D inner jacks.

The ES5 is essentially the brains of the whole rig. Pedals and amp are either managed through the ES5 Loops, via MIDI, or in the case of the Pitchfork+, through one of the CTL Outs. The other CTL Out serves as the PH3's tap tempo. Since I mute the guitar with the Polytune, the Mute footswitch in the ES5 becomes a general purpose footswitch for the ES5's CTRL Outs. The EHX Dual Expression pedal has 1 output connected to the PitchFork+ and the other connected to the ES5 Expression in, so it can control CC parameters on the MIDI pedals. The Tuner Out can be connected to an optional synth pedalboard in paralel with the main guitar rig.


The whole rig could also be programmed on a DAW session by connecting the MOD2 MIDI Input to an interface.

Les Paul Custom Plus VS

A Nave Espacial (The Spaceship)

Mono

Left

Right

Powerplant ISO-12 Pro

sejun williams

Seattle

Ojai

Ojai r30

Jose Luis Torrente

Wolfgang

EVH 2012 pedalboard

Made from a single sheet of cold-rolled aluminum, the ingenious, lightweight, stiff and rugged construction features vertical support struts for added stability and has not a single welded seam. The result is a completely flat and torsion-resistant surface that can be used edge-to-edge. The innovative slot design allows all cables to be conveniently and neatly routed under the board's surface. The precisely defined slot pattern provides a perfect fit for our innovative QuickMount system, which eliminates the need for hook & loop tape. Almost all common power supplies can be mounted on the underside. A Premium Gig Bag or sturdy Flight Case is included for safe transportation. Your choice.

CINQUE 5.2 Pedalboard

For 10 - 20 pedals

Details at a glance

CINQUE 5.2

Manuals

Reviews

Downloads